• Keysight Technologies announced a transmitter (Tx) and receiver (Rx) testing solution providing the speed needed to meet the PCI Express 5.0 standard.

 
Keysight’s PCIe 5.0 transmitter and receiver solution enables engineers with the tools necessary to achieve the speed and margins required to meet the standard, with upgradability for future investment protection.

Physical layer transmitter and receiver test tools capable of testing at 32GT/s enable designers to optimize their transmitter, receiver, and channel designs at the required data transfer rate.

The Keysight PCIe 5.0 receiver test solution enables the design and validation of circuits capable of tolerating significantly attenuated signals at 32 GT/s. PCIe 5.0 utilizes aggressive equalization techniques helping the receiver restore the quality of the transmitted signal, allowing for error-free recovery of the digital information from the PCIe Tx signal.

Due to these high data transfer rates, PCIe 5.0 receivers must accept a heavily degraded signal resulting from the channel’s high-frequency loss characteristics, resulting in unacceptable bit error ratios (BERs). To address this, Keysight has developed the M8040A High Performance 64Gbaud BERT, enabling physical layer characterization and compliance testing, to characterize receiver performance margins on the physical layer.

In addition, the increase in digital transmission speed and throughput introduce significant signal integrity challenges such as issues with connector crosstalk and receiver jitter sensitivity, driving the need for an accurate oscilloscope and receiver test solution. Keysight’s Infiniium UXR-Series oscilloscope provides bandwidth and noise floor performance to maximize margins and meet the challenges presented by the PCIe 5.0 standard, with upgradeability to 110 GHz.